Engine and Generator Controls
Engine and Generator Controls

KEYSTART 9620/9621

FEATURES

  • Operator controlled start/stop
  • Keyswitch operation
  • Automatic fault shutdowns and alarm output
  • Timed preheat output
  • Overspeed shutdown, driven from magnetic pickup or generator AC

 

KEYSTART 9620 and 9621 control modules provide manual start/stop and automatic fault protection for generators, pumps and other engine-driven applications.

 

Operator control is by a 4 position keyswitch, with the key removable only in the Stop/Reset (O) position. Outputs allow control of engine fuel (energised to run), starter motor and preheat. The Keystart also has an alarm output for remote or audible warning of faults.

 

Indication of engine status and faults is by six LEDs and icons. Four switch inputs (closing to negative on fault) enable automatic shutdown on engine low oil pressure, high coolant temperature and auxiliary faults. Model 9621 has a fully adjustable engine overspeed shutdown feature, configurable for either generator AC or magnetic pickup speed signals. Charge alternator excitation and a charge fail warning LED are fitted as standard.

 

Electrical connection is by quick-connect, spring-clamp terminal blocks. A universal 7 to 30VDC power supply permits operation with 12 or 24VDC engine batteries, with engine crank-dip voltage protection fitted as standard.

 

Keystarts are front-of-panel mounted through a standard square cut-out, and secured at the rear with quick-fit clips. Epoxy-resin case encapsulation gives superior vibration/shock resistance and environmental protection.

 

Download PDF

Please fill the form to download the PDF